Name: Voxelab Aquila X2 3D Printer
Price: 149 USD
Availability: InStock
Rating: 5.0 (43 Reviews reviews)

Voxelab Aquila X2 3D Printer

~~US$ 259.00 - US$ 359.00~~ US$ 149.00 - US$ 329.00

Main Features:

Components: 32-bit silent motherboard, silent stepper drivers make Aquila X2 operation whisper quiet.
Carborundum Glass Build Plate, ultra-flat, bed isn't warped at all.
Printing volume: 220*220*250mm. A 3d printer with a great balance on build volume, print quality and 3d printer price.
Filament detection sensor: detect and notify filament status during the printing process, guarantee successful print.
Filament auto feeding: Put in the filament end and it starts feeding automatically. The enhanced feeding module of Aquila ensures stable feeding (little breaking).
Resume printing: No worrying about accidental power off. Resumes print from where it stops when power is back on.
Aluminum body with sturdy structure, no shaking when printing.
4.3-inch color LCD screen, bright, easy to read, and user-friendly.
Cura / Prusa/ Simplify 3D / VoxelMaker software supported. Download Aquila Cura configuration file.
PLA, ABS, PETG, TPU filaments supported. Try the best 3D printing experience with PLA 1KG Filament.
Aquila X2 official firmware has thermal protection, and BL touch support features. Download the latest firmware here.
For consistent Aquila X2 H32 printing with Octoprint, please upgrade to our official firmware V 5.1.8. You may download it here.
Aquila X2 H32 Eclipse compatible source codes are available at GitHub. You may custom modify your printer freely.

What Voxelab Aquila X2 Users Say?

I love my Aquila so much I’m fighting myself not to buy a second one.

- Josh Kemp

Love mine, it's my first printer and have been printing non stop side I got it 4 months ago. Only had 1 failed print which was my fault.

- Jar Ed Chezzi

The voxelab staff are active in the group. And to be honest its better than the ender in many ways. The bed wasnt warped at all. Heats up fast 24v... the glass plate is great. Meanwell psu and silent board as standard. I replaced the springs with silicone and havent looked back.

- Matthew Williams

Reviews

Is the Aquila X2 better than Aquila? - A deeper look into the Voxelab Aquila X2 components

Voxelab Aquila X2 Detailed Introduction

5-Minute Quick Heating

Glass build plate heated up to 60℃ in 3 minutes and 110℃ within 5 minutes. Ensures excellent first-layer printing and easy model removal.

Print Models Freely

Aquila X2 allows you to 3d print teeny-tiny parts to big projects up to 220*220*250mm volume, all with a high success rate.

Setup Printing Easily

Color knob intuitive screen allows quick view and 3d print setup. New vertical panel conforms to the operation you wish you had.

High Standard V Profile

Sturdy V profile pulley ensures steady movement with low noise and excellent wear resistance, more durable and reliable.

X & Y-axis Tensioning knob

These knobs add or subtract tension from X and Y belts, critical for making prints without ringing or muting detail on sharp corners.

Filament Detection Sensor

Filament detection sensor helps detect & notify filament usage during 3d printing. Maximizes print success rate & avoids filament waste.

User-friendly Handle

Carry Aquila X2 to anywhere with the handle! Work together with others to 3d print big models, or showcase your 3d print talents with freedom.

32-bit Silent Motherboard

Equipped with a 32-bit controller board equipped with TMC2208 silent stepper driver, Aquila X2 ensures you a near-silent printing experience.

Open Source Firmware

Aquila X2 is a friendly open source 3d printer that compatible with multiple slicing software, flexible upgrades, and various modifications.

Build Your Own 3D Printer from Aquila X2, the DIY Kits

Similar as Aquila, Aquila X2 allows any 3D printer enthusiasts build their own 3D printer. Below are two aquila X2 plant from our users, be prepared to be amazed by the endless possibilities for customization! Have some inspiration? Get an Aquila X2 and start your own 3D Printer DIY journey!

“They work great for my beginner setup” - Josh Hocking

“I use all 4 of mine virtually all day every day. They require tinkering, they require attention, and they require a bit of love, but I thoroughly enjoy them and have zero regrets on buying them.” -Steven Maxwell

Voxelab Aquila X2 Prints

Wanna to get more inspiration on 3d printing and 3d printer DIY? Connect with us on social media, we constantly share our users’ projects!

Voxelab Aquila X2 FAQ

- What are the main differences between the original Voxelab Aquila and Voxelab Aquila X2?

Voxelab Aquila X2 armed with a filament runout sensor which is designed to detect whether your filament is run out during the printing process. It also has a new vertical design of a display panel, and a new handle.

- Does Voxelab Aquila X2 still need leveling?

Yes. There are 4 wheels under the hotbed. It is quite easy for manual leveling.

- Does Voxelab Aquila X2 support BL touch?

Yes, Voxelab offers BL-touch compatible firmware for Aquila X2. You may order a BL touch and install it onto your printer, then upgrade to the latest BL touch compatible firmware. Once done, you are all set for easy printing!

- Is there any community for Voxelab Aquila X2?

Yes. You can join our official Facebook group or visit Reddit r/VoxelabAquila.

ADVENTURER 5M PRO NEW RELEASE SHOP NOW

Voxelab Aquila X2 3D Printer

Submit your question

Answer question