This standard resin is professionally optimized for LCD lighting and molding, taking on higher print efficiency than other resins that can be comprehensively used for DLP/LCD/SLA 3D printers.
Excellent details on printouts
Low shrinkage, stable printing size, and high printing accuracy! Printing with Flashforge standard resin, you’ll get final prints with fine texture, smooth surface and wonderful presentation of details.
High curing speed
While ensuring the strength of the printed parts and ensuring non-excessive shrinkage, the printing speed of Flashforge standard resin is faster, using less curing time, and presenting higher printing efficiency than other types of resin!
Bright and beautiful furnish colors
The models printed out with Flashforge standard resin take on stunning color effects, just look like works of art!
Wide range of applications
The prints using this resin will not crack even after long-term placing. This resin is compatible with most LCD 3D printers in the market. It is widely used in making garage kits, prototyping and other industrial scenes.
Resin typeStandard Resin
Bending strength (Mpa)86 Mpa
Viscosity (cps, 25℃)250~350
Tensile strength (MPa)48 Mpa
Elongation at break (%)10%
Flexural modulus (MPa)2250 Mpa
Store at room temperature (10-30℃); away from light; kept dry and good ventilation. Do not put it under the sun or under strong light. Keep it out of the reach of children.
1. Shake it slightly before use.
2. Must wear gloves during the operation to avoid skin contact with the resin. If the resin is accidentally splashed on the skin or clothes, please wash it a lot with clean running water; if it splashes into the eyes, immediately lift the eyelids, rinse with clean running water and seek medical attention.
3. Different types of resin cannot be mixing-used lest bad printing quality.
4. Don’t throw around the wasted resin lest environment pollution.